Serving Victoria, TX & nearby Mon–Sat 7am–7pm
Licensed & Insured · Free Estimates
Victoria Siding Pros
Call us (361) 310-1492

Home › Service Areas › Bloomington

Siding & Stucco in Bloomington, TX

Local siding and stucco for Bloomington, TX homeowners, backed by the same crew that serves the greater Victoria area.

Free Quote(361) 310-1492

Victoria Siding Pros is a local siding and stucco company serving Bloomington, TX and the surrounding Victoria area. From your first call to the final walkthrough, you work with the same local crew — no call centers, no out-of-town subcontractors, just straight answers and quality work at a fair price.

Bloomington sits about 15 miles southeast of Victoria via TX-185 — a rail-era community platted in 1910, and we know the drive well.

A South Texas home exterior

Representative of the home exteriors common across our South Texas service area.

Below are the siding and stucco services we offer in Bloomington, TX. Choose one to learn more, or call (361) 310-1492 for a free estimate.

Siding & Stucco Services in Bloomington, TX

Fiber Cement Siding in Bloomington, TX

Durable, fire-resistant siding for Texas heat.

Vinyl Siding in Bloomington, TX

Affordable, low-maintenance vinyl siding.

Stucco Installation & Repair in Bloomington, TX

Stucco systems, installed and repaired by pros.

Siding Repair & Storm Damage in Bloomington, TX

Fast repair for storm-damaged or aging siding.

Soffit, Fascia & Exterior Trim in Bloomington, TX

New soffit, fascia, and trim for your roofline.

What to Know About Bloomington, TX

Bloomington, TX is in Victoria County, about 20 minutes from Victoria via TX-185. Bloomington was platted in 1910 as a station on the St. Louis, Brownsville and Mexico Railway and incorporated in 1913, then grew through the 1950s as the Dupont and Union Carbide plants nearby brought new residents to the area (Handbook of Texas).

Like the rest of the Crossroads region, Bloomington sits in a humid subtropical, Gulf-moisture climate with hot, humid summers -- conditions that punish siding with poor moisture management and reward materials and flashing details built for sustained humidity, not just heat.

Bloomington sits in Victoria County, which has a documented history of hail and thunderstorm-wind events in NOAA's Storm Events Database, and within the Atlantic hurricane season's typical landfall window (June through November) -- both relevant to how exterior cladding and flashing are detailed here.

Permits & Inspections in Bloomington, TX

Bloomington is unincorporated, so it doesn't have its own building-permit office. Victoria County's Environmental Services Program (Victoria County Public Health Department) handles floodplain, stormwater, and septic (OSSF) permitting for unincorporated areas like Bloomington; general construction work isn't separately permitted at the county level the way it is inside Victoria city limits.

Why Bloomington, TX Homeowners Choose Victoria Siding Pros

Every Bloomington, TX project starts with a free, on-site estimate — we walk the exterior, talk through material and color options for your home, and give you a clear written estimate before any work begins. No pressure, no hidden fees, and a firm price for what we quote.

Right Material for the Climate

We steer you to siding that stands up to the Victoria, TX sun and weather, not just the cheapest option.

Done Right Behind the Surface

Proper flashing and moisture barriers — the invisible details that prevent rot and failures.

No Hidden Fees

A clear, itemized quote up front and a firm price. What we quote is what you pay.

Nearby Communities We Serve

We also serve homeowners in Inez, TX, Placedo, TX, Nursery, TX, Telferner, TX, Goliad, TX, Edna, TX, Cuero, TX, Port Lavaca, TX, Refugio, TX. Visit your town’s page for local siding and stucco details:

Take this quick quiz to determine which siding material fits your Bloomington home

Three quick questions, then a straight answer about where we'd start the conversation for a Bloomington, TX home. Nothing here is a verdict — the free on-site estimate is what decides it.

What matters most to you in new siding?
What's on the house right now?
Where is the project at?
Based on your answers

Durability points toward fiber cement first

Fiber cement holds up to the Victoria, TX sun, moisture, fire, and pests better than most materials, and it holds paint well. Stucco is also worth a look if you like a seamless masonry finish. Either way, how it's installed — flashing and the moisture barrier underneath — matters as much as the material.

Low upkeep points toward vinyl or fiber cement

Vinyl never needs painting, and fiber cement holds paint for years between coats — they keep upkeep low in different ways. Which one fits depends on the house and the look you want, which is exactly what the on-site visit is for.

Upfront cost points toward vinyl first

Vinyl is where most upfront-cost comparisons start: the lowest material cost and the fastest installation of the three we install. Grade matters more than color for how it holds up, so we'll talk through that rather than just the sample chip.

It depends on the look you're after

Fiber cement comes in lap, panel, and shingle profiles; vinyl in clapboard, dutch lap, and board-and-batten; stucco gives a seamless finish with no panel joints at all. Tell us the look and we'll bring the options that actually deliver it to the estimate.

Something else is driving it — tell us what

If it's a mix of these, or something we didn't list, put it in the notes below and we'll start the conversation there. Any of the three materials we install can be the right answer depending on the house — the free on-site estimate is what decides it.

  • Older wood or lap siding is worth checking for rot and moisture behind it before anything new goes on — that's where most siding failures we see actually start.
  • If the existing vinyl is warping, buckling, or loose, it's worth finding out whether that's the panels or what's behind them before choosing a replacement.
  • Existing stucco can often be repaired in sections rather than redone wall by wall, so a repair is worth weighing against a full re-clad.
  • We'll identify what's on the house, and what condition it's in, during the free on-site estimate.
  • Whatever's on the house now, we'll identify it and check its condition during the free on-site estimate — if you know what it is, mention it in the notes below.
  • No pressure either way — the material pages on this site cover how each one is installed and holds up, and we're happy to answer questions before you're ready for a quote.
  • Our quotes are itemized and in writing, so you can compare them line by line with anyone else's.
  • Damage is worth looking at before material choice — the fix has to start with the cause, usually water getting behind the cladding.
  • Send your details below and we'll get right back to you to set up the on-site visit.
  • Wherever you're at with it, there's no pressure — tell us in the notes below and we'll pick up from there.

Get your free on-site estimate

Send your details and we'll follow up with a free, no-pressure on-site estimate for your Victoria, TX home. Your answers above come with it, so we can pick up where this left off.

Prefer to talk now? Call (361) 310-1492.

Service area

11 towns from our Victoria base · Victoria County

Service-area map: Bloomington relative to the 10 other towns served County outlines for Calhoun, DeWitt, Goliad, Jackson, Lavaca, Refugio, Victoria counties, Texas, with unlabeled major highway routes, the Guadalupe River and the Gulf coast; each town is a marked point at its true position, Bloomington in orange. Cuero · ~39 mi Edna · ~27 mi Nursery · ~22 mi Inez · ~17 mi Telferner · ~14 mi Victoria · ~13 mi Placedo · ~5 mi Goliad · ~30 mi Bloomington Port Lavaca · ~17 mi Refugio · ~33 mi
Distances are straight-line miles from Bloomington, not driving distance.
  • Victoria~13 mi (straight-line)
  • Bloomington
  • Inez~17 mi (straight-line)
  • Placedo~5 mi (straight-line)
  • Nursery~22 mi (straight-line)
  • Telferner~14 mi (straight-line)
  • Goliad~30 mi (straight-line)
  • Edna~27 mi (straight-line)
  • Cuero~39 mi (straight-line)
  • Port Lavaca~17 mi (straight-line)
  • Refugio~33 mi (straight-line)

Ready to transform your Victoria, TX home's exterior?

Call now or request a free quote — most estimates scheduled within 24 hours.

Call (361) 310-1492 Request a Quote